| 1. |  | 1.5 Ton Trolley Jack
Part No: ART252
short series great lift
PLEASE CONTACT US FOR DELIVERY COST! | Price: £250.00  |
| 2. |  | 15 Ton Press
Part No: ART155
Hydraulic Press
PLEASE CONTACT US FOR DELIVERY COST! | Price: £800.00 |
| 3. |  | 2 Ton One Post Lift
Part No: ART500
Single Post Lift 2 Ton
PLEASE CONTACT US FOR DELIVERY COST!
| Price: £4,250.00 |
| 4. | 2 Ton Trolley Jack
Part No: ART253
Short series great lift
PLEASE CONTACT US FOR DELIVERY COST! | Price: £274.00 |
| 5. |  | 2.5 Ton 2 Post Electromechanical Lift
Part No: ART199/P
Technical and structural layout
- Electromechanical operation
- Lifting by means of trapezoid turning screws, made of high resistance steel with fine pitch so that carriages may become self-braking
- Phosphor bronze main nut type "B14" together with a second safety demail nut of the same height and of the same top quality material, protected with electric safety cut out.
- Completely protected internal sliding carriages
- Slides in full drawn solid high resistance steel
- 4 sliding rollers for each trolley, plus 8 adjustable guide-shoes guarantee a perfect adhesion and movement
- Slave leg carriage connected to drive by chain, with safety cut out switch and tensioner to allow for low noise and smooth operation
- Automatic internal lubrication of each post
- Anti vibrating rollers
- Internal 24v electronics with build in protection
- Top quality electrical components
- Epoxy powder finish to the majority of exposed parts.
- "CE" approved with electromagnetic capability
Capacity: 2.5 Ton
Motor Power: 3.3 kW
Three-phase Motor: 230/400V (50Hz)
Weight: 810 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £3,450.00 |
| 6. | | 2.5 Ton 2 Post Electromechanical Lift
Part No: ART199/BXR
Technical and structural layout
- Electromechanical operation
- Lifting by means of trapezoid turning screws, made of high resistance steel with fine pitch so that carriages may become self-braking
- Phosphor bronze main nut type "B14" together with a second safety demail nut of the same height and of the same top quality material, protected with electric safety cut out.
- Completely protected internal sliding carriages
- Slides in full drawn solid high resistance steel
- 4 sliding rollers for each trolley, plus 8 adjustable guide-shoes guarantee a perfect adhesion and movement
- Slave leg carriage connected to drive by chain, with safety cut out switch and tensioner to allow for low noise and smooth operation
- Automatic internal lubrication of each post
- Anti vibrating rollers
- Internal 24v electronics with build in protection
- Top quality electrical components
- Epoxy powder finish to the majority of exposed parts.
- "CE" approved with electromagnetic capability
Capacity: 2.5 Ton
Motor Power: 3.3 kW
Three-phase Motor: 230/400V (50Hz)
Weight: 860 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £3,770.00 |
| 7. |  | 2.5 Ton Electo Hydraulic Lift
Part No: ART550
Lifting Platform - minimum encumbrace height only 130mm
PLEASE CONTACT US FOR DELIVERY COST! | Price: £2,385.00 |
| 8. | 2.8 Ton 2 Post Electromechanical Lift
Part No: ART199/D
Technical and structural layout
- Electromechanical operation.
- Rolled trapezoidal screws, made in heavy duty stainless steel.
- Self braking carriages mounted internally.
- Load bearing nuts from a special bronze alloy, to minimize lubrication.
- Self protected safety nuts.
- Monocoque body column structure.
- 2 Oversized electric motors with thermal overload protection.
- Closed circuit electrical system, with low voltage drives and end strokes controlled only by operator.
- Epoxy powder finish.
- Completely pre-assembled frame.
- Automatic arm synchronisation device.
- Includes pump action grease gun and anchor bolts.
- "CE" approved with electromagnetic compatibility.
Capacity: 2.8 Ton
Motor Power: 1.5 kW (both)
Three-phase Motor: 230/400V (50Hz)
Weight: 710 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £4,000.00 |
| 9. | 2.8 Ton 2 Post Electromechanical Lift
Part No: ART199/DK
Technical and structural layout
- Electromechanical operation.
- Rolled trapezoidal screws, made in heavy duty stainless steel.
- Self braking carriages mounted internally.
- Load bearing nuts from a special bronze alloy, to minimize lubrication.
- Self protected safety nuts.
- Monocoque body column structure.
- 2 Oversized electric motors with thermal overload protection.
- Closed circuit electrical system, with low voltage drives and end strokes controlled only by operator.
- Epoxy powder finish.
- Completely pre-assembled frame.
- Automatic arm synchronisation device.
- Includes pump action grease gun and anchor bolts.
- "CE" approved with electromagnetic compatibility.
Capacity: 2.8 Ton
Motor Power: 1.5 kW (both)
Three-phase Motor: 230/400V (50Hz)
Weight: 720 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £3,450.00 |
| 10. |  | 250kg Transmission Jack
Part No: ARTSIF1/73
250Kg hydraulic transmission jack with a minimum height of 1240mm, stroke of 850mm giving a maximum height of 2090mm. Base width 410mm. Base length 585mm.
PLEASE CONTACT US FOR DELIVERY COST! | Price: £ 245.00 Our Price: £ 220.00 |
| 11. | 3.2 Ton 2 Post Electromechanical Lift
Part No: ART199/G
Technical and structural layout
- Electromechanical operation.
- Rolled trapezoidal screws, made in heavy duty stainless steel.
- Self braking carriages mounted internally.
- Load bearing nuts from a special bronze alloy, to minimize lubrication.
- Self protected safety nuts.
- Monocoque body column structure.
- 2 Oversized electric motors with thermal overload protection.
- Closed circuit electrical system, with low voltage drives and end strokes controlled only by operator.
- Epoxy powder finish.
- Completely pre-assembled frame.
- Automatic arm synchronisation device.
- Includes pump action grease gun and anchor bolts.
- "CE" approved with electromagnetic compatibility.
Capacity: 3.2 Ton
Motor Power: 2 kW (both)
Three-phase Motor: 230/400V (50Hz)
Weight: 750 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £4,200.00 |
| 12. | 3.2 Ton 2 Post Electromechanical Lift
Part No: ART199/GK
Technical and structural layout
- Electromechanical operation.
- Rolled trapezoidal screws, made in heavy duty stainless steel.
- Self braking carriages mounted internally.
- Load bearing nuts from a special bronze alloy, to minimize lubrication.
- Self protected safety nuts.
- Monocoque body column structure.
- 2 Oversized electric motors with thermal overload protection.
- Closed circuit electrical system, with low voltage drives and end strokes controlled only by operator.
- Epoxy powder finish.
- Completely pre-assembled frame.
- Automatic arm synchronisation device.
- Includes pump action grease gun and anchor bolts.
- "CE" approved with electromagnetic compatibility.
Capacity: 3.2 Ton
Motor Power: 2 kW (both)
Three-phase Motor: 230/400V (50Hz)
Weight: 760 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £3,100.00 |
| 13. |  | 3.5 Ton 4 post lift
Part No: ART402
For Wheel alignment
PLEASE CONTACT US FOR DELIVERY COST! | Price: £6,400.00 |
| 14. | 4 Ton 2 Post Hydraulic Lift
Part No: ART199/V
Technical and structural layout
- Electro hydraulic operation
- Operator controlled with auxiliary voltage 24v.
- The two carriages are hydraulically synchronised, independent of the load distribution, with control constantly being adjusted through a height adjusting device.
- Safety cut out, in case of obstruction when lowering.
- Compensation valve for control of descent speeds.
- Anti toe traps also arms lock automatically when raised off ground.
- Special "Parking" position on mechanical ladder rack and electrical solenoid/automatic engagement of locking tooth.
- Safety load sensing valves in case of hydraulic fluid loss, and by-pass overload valve in case of maximum load being exceeded.
- "CE" approved with electromagnetic compatibility.
Capacity: 4 Ton
Motor Power: 2.2 kW
Three-phase motor: 230/400V (50Hz)
Weight: 1270 kg
PLEASE CONTACT US FOR DELIVERY COST! | Price: £5,470.00 |
| 15. | 400kg Transmission Jack
Part No: ARTSIF1/A/73
Minimum Height 1240
PLEASE CONTACT US FOR DELIVERY COST! | Price: £250.00 |
| 16. |  | 500kg Folding Crane
Part No: ART GP5/S
Single action pump, 4 working positions
PLEASE CONTACT US FOR DELIVERY COST! | Price: £410.00 |
| 17. | Dust Cover Rubber
Part No: ART199/63
Spare Part - Dust cover for OMCN ramp. Sold as a pair. | Price: £35.00 |
| 18. |  | Jolly Dolly
Part No: ART250
Moves vehicles without front or rear mechanics
PLEASE CONTACT US FOR DELIVERY COST! | Price: £220.00 |
| 19. | Super Condor
Part No: ART275
Adjustable cross member
PLEASE CONTACT US FOR DELIVERY COST! | Price: £ 165.00 Our Price: £ 140.00 |
| Listing Page 1 of 1 (Total Products: 19) | |
| | | |
